«Ulyanovsk plant Stroiplastmass Limited»«Ulyanovsk plant Stroiplastmass Limited»
 
PlantProductsContactsOffers

Our products
  • Linoleum
  • Auto linoleum
  • Potting compounds
  • Cellular plastic
  • Pipes
  • Varnish-paint
  • Glue
  • Polyethylene pellicle
  • Others
  • Production costs
  • Charging norms
  • Marketing department:
    +7 (84254) 2-15-07

    Potting compound


    Non-hardening cooling potting compound

    TU 2513-006-12568007-97

    It is used for the potting of top and low forward wardrobe's slats and wire's exit in refrigeration.
    Potting compound is a non-hardening material made from synthetic rubbers, fillers, plastifiers and additions.

    Physicomechanical indexes

    Index nameTU norm
    ExteriorLight tone without ectogenic inserts and lumps
    Ultimate strength at the tension, kgs/sq.sm., not less than
    - at the temperature of (23±5) deg.C.
    - at the temperature of minus (40±2) deg.C

    0,4
    0,4
    Character of fracturecohesive
    Leakage resistance, mm0
    Penetration, mm, not less than4.0 - 8.0

    Potting compound is packed into braids: length - 540 mm (diameter - 5 mm) [order], length 500 mm (diameter - 15 mm) [order]. Braids' potting compound is packed in series. Quantity of stratums must not be more than 15 in height.



    GUAZ - obturative anticorrosive auto potting compound

    TU 5770-085-00284718-95

    You can use it to obdurate metallic surfaces of welds and other metallic bridgings, components, nodes and cabins of automobiles.
    Potting compound is a non-hardening material made from synthetic rubbers (butyl rubber, ethylene propylene), fillers, plastifiers and technological additions.

    Physicomechanical indexes

    Index nameTU norm
    Exterior Soft homogeneous material from light-grey to brown color
    Ultimate strength at the tension, kgs/sq.sm., not less than
    - at the temperature of (23±5) deg.C.0.5
    - at the temperature of minus (60±2) deg.C Ñ0.5
    Character of fracturecohesive
    Leakage resistance, mmWithout refluxing
    Penetration, mm, not less than8.0
    Dencity, kg/cub.m., not more than1600
    Impact of varish-painted coat at the temperature 140 deg. Ñ during 60 min. Without refluxing, inflation, cratering and change of enamel color.

    Potting compound keeps their physicomechanical properties at the temperature from - 60 to 200 deg. C. It also does not flake, evoke contraction, moreover it does not slake after finishing technological cycle (precoating, coloring, drying).
    It is manufactured in briquettes (length - not more than 450 mm; mass - 1,5-3 kg). Briquette is wrapped up by thin stratum of talcum and stacked in cardboard boxes or wooden drawers.

    Hygienic certificate ¹ 73.ÎÖ.11.240Ï.00013.Ñ.98.1888945 given by CGSES of Ulyanovsk region in 28.08.1998. Term operation - from 28.08.1998 until 30.08.2001


    [order]


    Non-hardening sealing building mastic

    GOST 14791-79

    You can use it to seal closed and drained butts of exterior walls and to obdurate places where window and door blocks link with wall elements.

    It was awarded the diploma of All-Russian competition "the best 100 products of Russia"
    Other awards of the plant

    Mastic is a non-hardening material made from synthetic rubbers (butyl rubber, ethylene propylene), fillers, plastifiers and additions.

    Physicomechanical indexes

    0.4 7 - 11 2.0 7.0
    Index name TU norm
    Exterior Soft homogeneous material
    Ultimate strength at the tension, kgs/sq.sm., not less than 0.08 - 0.10
    Relative protraction at the maximum loading, %, not less than 35
    Character of fracture cohesive
    Water uptake, %, not more than 0.4
    Consistence, mm 7 - 11
    Refluxing of mastic at the temperature 70 deg.Ñ (heat resistance), mm, not more than 2.0
    Relative protraction at the temperature minus 50 deg.Ñ, %, not less than 7.0
    Migration of plastifier Does not admit

    You can use non-hardening mastic to seal closed and drained butts of exterior walls and to obdurate places where window and door blocks link with wall elements. In this case, mastic keeps properties at the temperature from minus 50 to plus 70 deg. C, under following conditions: width of sealing butt varies from 10 to 30 mm and relative deformation of non-hardening mastic in the weld is not more than 10%.
    We manufacture mastic as braids (diameter - 50 mm, length - from 450 mm, mass - not more than 3 kg)
    Briquettes are wrapped up with polyethylene pellicle, packed in boxes.


    Quality certificate N ÐÎÑÑ.RU.XÏ14.ÂÎÎ481 given by "Ruscertificate" Center in 19.10.98. Term operation - from 19.10.98 until 01.10.2001.


    [order]

  • Our awards
  • We buy
    Poll

    1044: Access denied for user ''@'localhost' to database 'stmass_ru'

    be number one

  • Top E-mail:market@stmass.ru

    Web-site made in VolgaGIS, 2000-2002