Varnish-painted materials
Enamel PF-115
GOST 6465-76
Enamel PF-115 (different colors) is a suspension of titanium dioxide other pigments and filling compounds in pentaphtol varnish with addition of a desiccant and solvents.
Enamel PF-115 is used for coloring of metallic wooden and others surfaces which undergo atmospheric impact.
Enamel PF-115 puts on a surface by methods of sputtering, jet perfusion, dipping and by paintbrush. Before application of the enamel, it is diluted up to working viscosity by a solvent, mineral spirit (nefrac-S4-155/200), turpentine or their mix in the ratio 1:1 on weight.
To color items in an electrofield, enamel is diluted up to working viscosity by diluent ÐÝ-4Â or ÐÝ-3Â.
Technical characteristics
| Index name |
GOST-norm |
| Color of pellicle's paint |
As a standard |
| Exterior |
After desiccation, the enamel should derivate smooth, homogeneous surface without stratifying, smudges, folds and ectogenic inserts. |
| Mass share of nonvolatile substances, % |
62 - 68 |
| Luster of a pellicle on photo-electric measure of luster, % |
Not less than 50 |
| Covering power of the dried pellicle, g/sq.m. |
Not more than 100 |
| Rate of dilution to viscosity 28-30ñ on viscosimeter type Â3-246, % |
Not more than 20 |
| Paint's frost resistance, cycles |
Not less than 5 |
| Conditional light resistance, % |
Not more than 5 |
| Grindance degree, mkm |
Not more than 25 |
| Pellicle's elasticity at the arcuation, mm |
Not more than 1 |
| Pellicle's strength at the impact on the device (type) Ó-1, sm |
Not less than 40 |
| Hardness of pellicle according to pendulous device, arbitrary units |
Not less than 0.25 |
| Pellicle's adhesion, balls |
Not more than 1 |
| Coat's resistance at the temperature (20±2) deg.C to water's static impact, hours |
Not less than 2 |
| Coat's resistance to static impact of 0.5% solution of detergent, min |
Not less than 15 |
| Coat's resistance at the temperature (20±2) deg.C to transformer oil's static impact, hours |
Not less than 24 |
| Drying period to the third degree at the temperature (20±2) deg.C, hours |
Not more than 24 |
[order]
Water-dispersing paints WD-AK-111
GOST 28196-89
Water-dispersing paints is the suspensions of pigments and filling material in synthetic polymers' water dispersion with addition of different auxiliary substances (emulsifiers, stabilizers etc.).
It is used for internal and external coloring of brick, cement, rendering, wooden and other porous surfaces (instead of floors) of buildings and constructions. It is also used for internal and external coloring of primed surface of metal, old coats, fruit and decorative trees, bushes with the purpose of increase their winter resistance, preservation from solar combustions, protection against the gnawers and puttying of wounds.
Technical characteristics
| Index name | GOST-norm |
|---|
| Color of pellicle's paint | As a standard |
| Exterior | After desiccation, paint should derivate a film, with smooth homogeneous mat. |
| Mass share of nonvolatile substances, % | 52 - 57 |
| RN paints | 8.0 - 9.0 |
| Covering power of the dried pellicle, g/sq.m. | Not more than 100 |
| Coat's resistance to water's static impact at the temperature (20±2) deg.C, hours | Not less than 24 |
| Paint's frost resistance, cycles | Not less than 5 |
| Conditional light resistance, % | Not more than 5 |
| Grindance degree, mkm | Not more than 60 |
| Drying period to the third degree at the temperature (20±2) deg.C, hours | Not more than 1 |
Hygienic certificate ¹73.ÎÖ.11.231.Ï.000193Ä.99 given by CGSES of Ulyanovsk region in 05.05.1999.
[order]
|
